Payment & Shipping Terms:
|Water / Mixed Foam
|Auto / Manual
|Fire Fighting Pump
forest fire pump,
portable fire pump
Diesel engine fire pump,fire fighting pump,Diesel fire pump,
Diesel engine fire pump set
With full-automatic control design, with manual control, automatic program control, remote control, forced start and other control modes.
In addition to the constant speed control mode of the conventional fire fighting system, through the configuration of speed PID regulating ring and pressure PID regulating ring for double loop control, the constant pressure water supply is realized accurately, stably and rapidly, the personal safety of the fire fighters is effectively protected, and the fire extinguishing efficiency is improved.
Program parameters can be set through the human-computer interface; the pressure value at the pump outlet can be set by the user. After the commissioning is completed, the daily fire signal can automatically start the fire fighting unit without manual operation.
The system provides three ways of temperature control devices for room temperature, water temperature of water tank and water temperature of pipeline system, which can automatically start and stop heating according to the feedback information of temperature sensor, keep each temperature control point within a certain range, effectively prevent water icing, and ensure the fire protection system can be put into operation at any time.
The automatic charger ensures that the engine is ignited at full voltage at any time; the fully automatic battery charger has the characteristics of constant voltage, constant current, trickle current and short circuit resistance.
6. Remote network control
It is equipped with remote control communication port, which is connected with computer, and can display various states such as alarm, protection, fault signal, etc., so as to realize remote and comprehensive monitoring of unit operation.
7.full automatic foam proportioning
The system is equipped with a fully automatic foam proportioning device. It can automatically suck the foam liquid proportionally and form a foam mixture of 30, O or 6%.
8. Self priming function
It can be equipped with a full-automatic vacuum water diversion pump to realize the self-priming function without external power, and the water will be automatically separated after being led up.
It can be controlled manually or automatically, and the user can choose the control form by himself.
The pump group with less than 200L/S flow can bring its own full automatic foam proportioning mixer, that is, internal mixing, and it can also be achieved by setting up another mixer outside the pump (that is, plug-in type). The fire pump group with a flow rate of 200L/S or more needs to be installed outside the pump by external mixer (i.e. plug-in). Users can choose the form of foam or foam mixture.
The pump set with flow below 200L / s can also realize self suction function, that is, it is equipped with full-automatic vacuum water pump for water diversion, which can be selected by users.
1. High strength aluminum alloy fire pump (only for pumps below 200L / s)
It has the characteristics of compact structure, pollution-free and light weight. The outlet pipe and outlet valve with fire hose interface can be directly connected with the hose (flange connection can also be changed according to the user's requirements).
2. Single garbage double suction horizontal split centrifugal pump
The suction inlet and discharge outlet are under the axial line of the pump, and perpendicular to the axial line. When maintenance is carried out, all parts in the pump can be taken out as long as the pump cover is opened, and the pump body, suction pipeline and discharge pipeline need not be disassembled, so the maintenance is extremely convenient.
3. Shaft seal
Adopt soft packing or mechanical seal, the mechanical seal is not limited by the rotation direction.
diesel engine, fire pump , control system,all functions and requirements are customizable .
Contact Person: Spring Wang
Tel: 0086 3529980